(*) More details ? Please download our Technical Specification.
Chemical Pallet or VMF
less than 1500kg
more than 25 kg
Pallet CP3 in Wood Dimension 1140X1140 Chemical Industry Standard
Our new pallet manufacturers can package according to your logistic needs:
- in pallet stack Interlocked (nested),
- in a stack of pallets stacked one on top of the other,
- the number of pallets constituting the stack can also be adapted to your own needs, especially if you have height constraints for the passage on the platform or under your doors. The maximum is one delivery per tray with 40 high pallets per stack.
On your request, we can offer you a delivery in a trailer truck with a larger quantity.
The dimensional family of perimeter is 1140 X 1140 is an Adpated to the container.
As from the validation of your order, the delivery time normally noted of your order is 1 to 2 weeks for quantities lower than 100.
For large quantities (full truck for example), we specifically manufacture your order in Wood Pallet 1140 X 1140 X 138 - CP3.
We can also customize and add on your pallets your Logo, or any inscription desired in fire marking on wooden blocks. The delivery time is then generally between 3 and 4 weeks.
We select our transport partners for you to guarantee both the reliability and quality of your delivery. We are also in direct contact with our carriers to always know where your order is.
We can deliver anywhere in Metropolitan France, Corsica and Europe.
That is why we systematically carry out an "estimate" study that we submit to you.
Features Pallet CP3 (PB11401140138-CP3)
Outer dimensions of the wooden pallet are 1140 mm in length, 1140 mm in width and 138 mm in height.
It is a pallet with 4 entries, i.e. you can handle your pallet with a forklift truck or a pallet truck by the 4 sides.
Weights and Resistance
CP3 weighs Over 25 Kgs, it resists a dynamic load of 1500 kg and static load of 3100 kg.
Is it nestable? No
Is it Rackable? Yes with a maximum load of 1500 kg
Is it stackable ? Yes
Composition of the pallet Wood pallet 1140 X 1140 X 138 - CP3
The dimensions below are expressed in mm
Length Width Thickness Quantity
Board 1 | 1140 |80 |18| 6
Board 2 | 1140 |120 |18| 3
Stringer | 1140 |100 |22 |3
Block 1 135 80 80 9
Skid 1 |1140 |135 |18 |3
The total theoretical wood volume of the pallet is 40.854 dm3.
The four corners are cut : Yes and the soles chamfered : Yes
You can find all the details of the characteristics by downloading our specifications under the tab "Technical Data Sheet".
ISPM15 Treatment and Moisture Content
The CP3 1140X1140 pallet is subject to the ISPM15 standard for the heat treatment of wood packaging.
The relative humidity of the wood pallet is above 45%. For this reason, we strongly advise you to mechanically dry your pallets for your container or long-distance truck exports.
This will avoid the potential inconvenience of contamination by mould or fungus as well as the rising of humidity on your boxes during deliveries.
For your exports, we provide you a certificate of conformity of the pallets that we will have been treated in accordance with the standard ISPM15.
Wooden Pallet does not require any special storage conditions. You can store indoors or outdoors.
When loaded with your products, they can be stored sheltered or outdoors depending entirely on the protection and weather sensitivity of your products.
New pallets are handled with an electric or manual forklift truck or pallet truck.
The logistics handling of the pallet can be carried out by its 4 sides.
Precautions for use
The precautions for use are only associated with your handling conditions and the condition of the soil during transport. If you hit a pallet with the forks of a forklift truck, the forks can seriously damage the structure and alter the load resistance conditions.
When handling by hand, the use of suitable safety gloves is mandatory to prevent splinters and cuts.
CP3 Pallet 1140X1140 is produced according to strict quality criteria using sections of softwood (pine, fir, Douglas fir, etc.).
The variability in moisture content of the wood imposes tolerances on the dimensions of +0/-2mm. The tolerances are greater during mechanical drying where the shrinkage of the wood is greater +0/-4mm.
Tolerances are checked on thickness, width and section lengths.
For any request, please indicate our reference [PB11401140138-CP3].
We use a moderation tool to ensure the accuracy of our clients' opinions and notes. Our Quality Department is authorised to receive our customers' opinions by email and telephone. All the reviews on this page are ordered by date. You can read our review system rules here: Legal and conditions of use