(*) More details ? Please download our Technical Specification.
Chemical Pallet or VMF
less than 1500kg
more than 25kg
Lay out Pallet CP1 in Wood 1000X1200 Chemical Pallet Standard
Our new pallet manufacturers can package according to your logistic needs:
- in pallet stack Interlocked (crossed 1 in 1 )
- in a stack of pallets stacked one on top of the other ( One on One)
- the number of pallets constituting the stack can also be adapted to your own needs, especially if you have height constraints for the passage on the platform or under your doors. The maximum is one delivery per tray with 40 high pallets per stack.
On your request, we can offer you a delivery in a trailer truck with a larger quantity.
The perimeter dimensional family is 1000 X 1200 is an Industry Dimension.
Delivery Conditions Pallet CP1 Brand New
As from the validation of your order, the delivery time normally noted of your order is 1 to 2 weeks for quantities lower than 100.
For large quantities (full truck for example), we specifically manufacture your order in Pallet CP1.
We can also customize and add on your pallets your Logo, or any inscription desired in fire marking on wooden blocks. The delivery time is then generally between 3 and 4 weeks.
We select our transport partners for you to guarantee both the reliability and quality of your delivery. We are also in direct contact with our carriers to always know where your order is.
We can deliver anywhere in Metropolitan France, Corsica and Europe.
That is why we systematically carry out an "estimate" study that we submit to you.
Characteristics of CP1 Pallet
The outer dimensions of the CP1 pallet are 1200 mm long, 1000 mm wide and 138 mm high.
It is a pallet with 4 entries, i.e. you can handle your pallet with a forklift truck or a pallet truck by the 4 sides.
Weights and Resistance
Wooden Chemical Pallet 100X120 CP1 weighs Over 25 Kgs, it resists a dynamic load of 1500 kg and static load of 2700 kg.
Is it nestable? No / No
Is it Rackable? Yes / Yes with a maximum load of 1400 kg
Is it stackable ? Oui / Oui
The total theoretical wood volume of the pallet is 39.97 dm3.
The four corners are cut Yes / Yes and the soles chamfered Yes / Yes
You can find all the details of the characteristics by downloading our specifications under the tab "Technical Data Sheet".
ISPM15 Treatment and Moisture Content
It is subject to the ISPM15 Standard for the heat treatment of all wood packaging.
The relative humidity of the wood pallet is above 45%. For this reason, we strongly advise you to mechanically dry your pallets for your container or long-distance truck exports.
This will avoid the potential inconvenience of contamination by mould or fungus as well as the rising of humidity on your boxes during deliveries.
For your exports, we provide you a certificate of conformity of the pallets that we will have been treated in accordance with the standard ISPM15.
Conditions of use
The CP1 does not require any special storage conditions. You can store indoors or outdoors. However if you want to keep it dry, insure to store inside & protected from rain and humidity.
When loaded with your products, they can be stored sheltered or outdoors depending entirely on the protection and weather sensitivity of your products.
For exportation, we strongly advise to keep empty and full pallets dried under roof. Shipping by sea container could have huge impact on moisture content. Mould and/or mushroom can appear during the trip and contaminating your boxes and goods.
New pallets are handled with an electric or manual forklift truck or pallet truck.
The logistics handling of the pallet can be carried out by its 4 sides
Precautions for use
The precautions for use are only associated with your handling conditions and the condition of the soil during transport. If you hit a pallet with the forks of a forklift truck, the forks can seriously damage the structure and alter the load resistance conditions.
When handling by hand, the use of suitable safety gloves is mandatory to prevent splinters and cuts.
Pallet CP1 is produced according to strict quality criteria using sections of softwood (pine, fir, Douglas fir, etc.).
The variability in moisture content of the wood imposes tolerances on the dimensions of +0/-2mm. The tolerances are greater during mechanical drying where the shrinkage of the wood is greater +0/-4mm.
Tolerances are checked on thickness, width and section lengths.
For any request, please indicate our reference [PB10001200138-CP1].