PressWood 1/2 Pallet (600X800)

There are 2 products.
Showing 1 - 2 of 2 items

Features Moulded Pallet 60X80


Our half-pallets of 600X800 mm presswood are suitable for medium-sized parcels, e-commerce or more classic shipments.

They weigh less than 7.5 kg. Contains No screws, No nails, and no splinters for safe handling and limiting the risk of workplace accidents. We still recommend the use of suitable gloves during handling.

Up to 1 ton load resistance, moulded pallets are a real alternative in store, no need to "unload", at the top of the gondola you put your products directly into free access and you save time!

The 1/2 of presswood pallets are "conditionable" by 2 on mother pallet of size 80X120 Type EPAL, (Pallet Europe) or still lost light and 1/2 heavy.

They are Dry (+/- 12 %) Naturally ISPM15 compliant, and can be exported even by air throughout the world without any problem.

They are PEFC certified.

With 4 entrances, you handle easily by cart or pallet truck. No need to force with the pallet truck, no sole to hinder the introduction of the forks on the 4 sides

Our products dimension 1/2 pallet in moulded wood


We offer two models to adapt to your needs, a pallet with a classic resistance of 500kg and a model more resistant and able to support up to 1 ton in load.

Conditions of use

Storage Condition


We advise you to store empty moulded pallet stacks indoors or under shelters. however, if you cannot store indoors, we offer you the addition of an extra layer of protection. thus covered from top to bottom your pallet stacks remain protected from the elements and retain all their properties for a long time.

How 60x80 presswood pallets are produced?


We tell you everything about our BLOG

Need to know more?


Discover our technical data sheets in free access on each of our "product" pages

Contact us for advice and save you time:

- free telephone callback,

- request a free quote within 24 hours, or via our online messaging service.

Environmental Impact


Moulded wood pallets are totally recyclable and biodegradable. They can be integrated directly into a reconditioning cycle and used either in the design of new wood composite products or used in bio-mass to produce energy.

Moulded wooden pallets are a real ecological alternative and fully contribute to the circular economy.

Our factories are PEFC certified, which guarantees the origin of the wood raw material. This certification also guarantees the preservation of natural ecosystems.

Moulded pallets do not take more wood from forests. Their manufacture is based on the ancillary products of sawmill (wood chips) and recycling economy (wood shredding).

The use of these directly available materials allows carbon capture to be maintained much longer.

Quality


The manufacture of pallets follows a very rigorous quality control process. From the receipt of the raw material to the finished product, sampling and quality tests are carried out at the various stages of production. Pallets that do not meet quality standards due to their varying weight and strength characteristics are systematically discarded. They are then crushed and the recovered raw material can be used again in the production of a new pallet.

The monobloc structure, i.e. the production in one piece, under thermo-moulding, gives the moulded pallet a better solidity while remaining lighter. It also has more precise dimensions, which it keeps even in very humid environments.

In addition, they are accepted as food packaging and sanitary approved. As with wood packaging in general, it is not recommended to apply any food directly without protection and packaging or additional support.

Discover the other materials in 1/2 pallet euro size 60X80


1/2 plastic pallets

Half-pallet Cardboard

New half wooden pallet 600X800

600X800 recycled wooden pallets

New Dusseldorfer Pallet

Used dusseldorfer

Accept

While browsing on your site, you agree to the use of Cookies to propose you products adapted to your needs and to realize statistics of visits.