Packaging New Wooden Pallet CP and VMF
Our new pallet manufacturers can package according to your logistic needs:
- per pallet stack (nested)
- per stack of pallets stacked on top of each other
- the number in stacks will be adapted to your needs. If you have constraints on the height when passing through a dock or under your doors.
We can deliver you by truck trailer, the quantity will then be more important
Delivery Conditions wooden Chemical Pallet & VMF
Delivery times
As from the validation of your order, the delivery time normally noted of your order is 1 to 2 weeks for quantities lower than 100.
For large quantities (full truck for example), we specifically manufacture your order in CP and VMF pallets.
Our Carriers
We select our transport partners for you to guarantee both the reliability and quality of your delivery. We are also in direct contact with our carriers to always know where your order is.
Delivery area
We can deliver anywhere in Metropolitan France, Corsica and Europe.
We systematically carry out an "estimate" study that we submit to you in order to be as close as possible to your needs and maintain a high level of quality.
Our Complete Range in CP and VMF Pallets
CP1 Pallet
CP2 Pallet
CP3 Pallet
CP4 Pallet
CP5 Pallet
CP6 Pallet
CP7 Pallet
CP8 Pallet
CP9 Pallet
VMF Pallet
See also our second-hand & recycled pallets
ISPM15 Treatment and Moisture Content
They are fully subject to the ISPM15 Standard for the heat treatment of all wood packaging. During your export shipments you must provide in your customs file the treatment certificate containing the coordinates and approval number of the site that practiced ISPM15.
The relative humidity of the wood pallet is above 45%. For this reason, we strongly advise you to mechanically dry your pallets for your container or long-distance truck exports.
This will avoid the potential inconvenience of contamination by mould or fungus as well as the rising of humidity on your boxes during deliveries.
For your exports, we provide you with a certificate of conformity for the pallets we have processed.
Conditions of use
Storage conditions
The CP or VMF Wooden Pallets, do not require particular storage conditions in general, it depends on your qualitative constraints for the packaging of your products. You can store indoors or outdoors.
When loaded with your products, they can be stored sheltered or outdoors depending entirely on the protection and weather sensitivity of your products.
Handling conditions
New pallets are handled with an electric or manual forklift truck or pallet truck.
The logistics handling of the pallet can be carried out by its 4 sides
Precautions for use
The precautions for use are only associated with your handling conditions and the condition of the soil during transport. If you hit a pallet with the forks of a forklift truck, the forks can seriously damage the structure and alter the load resistance conditions.
When handling by hand, the use of suitable safety gloves is mandatory to prevent splinters and cuts.
Quality
CP and VMF pallets are manufactured according to strict quality criteria using sections of softwood (pine, fir, Douglas fir, etc.).
The variability in moisture content of the wood imposes tolerances on the dimensions of +0/-2mm. The tolerances are greater during mechanical drying where the shrinkage of the wood is greater +0/-4mm.
Tolerances are checked on thickness, width and section lengths.
