Conditioning Wooden Pallet CP6 New Dimension 100X120 Chemical Industry
Our new pallet manufacturers can package according to your logistic needs:
- in pallet stack Interlocked (nested),
- in a stack of pallets stacked one on top of the other,
- the number of pallets constituting the stack can also be adapted to your own needs, especially if you have height constraints for the passage on the platform or under your doors. The maximum is one delivery per tray with 40 high pallets per stack.
On your request, we can offer you a delivery in a trailer truck with a larger quantity.
The perimeter dimensional family is 1000 X 1200 is an Industry Dimension.
Shipping Conditions
Delivery times
As from the validation of your order, the delivery time normally noted of your order is 1 to 2 weeks for quantities lower than 100.
For large quantities (full truck for example), we specifically manufacture your order in Wood Pallet 1000X1200 X 174 - CP6.
We can also customize and add on your pallets your Logo, or any inscription desired in fire marking on wooden blocks. The delivery time is then generally between 3 and 4 weeks.
Our Carriers
We select our transport partners for you to guarantee both the reliability and quality of your delivery. We are also in direct contact with our carriers to always know where your order is.
Delivery area
We can deliver anywhere in Metropolitan France, Corsica and Europe.
That is why we systematically carry out an "estimate" study that we submit to you.
Features Wooden pallet CP6
Outer dimensions
The external dimensions of the wooden pallet are 1200 mm in length, 1000 mm in width and 174 mm in height.
It is a pallet with 4 entries, i.e. you can handle your pallet with a forklift truck or a pallet truck by the 4 sides.
Weights and Resistance
Our Wood Pallet 1000X1200 X 174 - CP6 weighs Over 25 Kgs, it resists a dynamic load of 2400 kg and static load of 3480 kg.
Is it nestable? No
Is it Rackable? Yes with a maximum load of 2400 kg
Is it stackable ? Yes
Composition of the pallet Wood Pallet 1000 X 1200 X 174 - CP6
The dimensions below are expressed in mm
Length x Width x Thickness x Quantity
Board 1 |1200x120x18x2
Board 2 |1200x80x18x7
stringer |1000x100x22x3
Block |100x80x80x9
Runner 1 |1100x80x36x3
Runner 2 |900x100x18x3
The total theoretical wood volume of the pallet is 44,00dm3.
The four corners are cut Yes and the soles chamfered Yes
You can find all the details of the characteristics by downloading our specifications under the tab "Technical Data Sheet".
ISPM15 Treatment and Moisture Content
The Wooden Pallet CP6 is subject to the ISPM15 Standard for the heat treatment (HT - IPPC)of all packaging.
The relative humidity of the wood pallet is above 45%. For this reason, we strongly advise you to mechanically dry your pallets for your container or long-distance truck exports.
This will avoid the potential inconvenience of contamination by mould or fungus as well as the rising of humidity on your boxes during deliveries.
For your exports, we provide you a certificate of conformity of the pallets that we will have been treated in accordance with the standard ISPM15.
Conditions of use
Storage conditions
It does not require any special storage conditions. You can store indoors or outdoors.
When loaded with your products, they can be stored sheltered or outdoors depending entirely on the protection and weather sensitivity of your products.
Handling conditions
New pallets are handled with an electric or manual forklift truck or pallet truck.
The logistics handling of the pallet can be carried out by its 4 sides.
Precautions for use
The precautions for use are only associated with your handling conditions and the condition of the soil during transport. If you hit a pallet with the forks of a forklift truck, the forks can seriously damage the structure and alter the load resistance conditions.
When handling by hand, the use of suitable safety gloves is mandatory to prevent splinters and cuts.
Quality
Wooden Pallet and precisely CP6 is produced according to strict quality criteria using sections of softwood (pine, fir, Douglas fir, etc.).
The variability in moisture content of the wood imposes tolerances on the dimensions of +0/-2mm. The tolerances are greater during mechanical drying where the shrinkage of the wood is greater +0/-4mm.
Tolerances are checked on thickness, width and section lengths.
For any request, please indicate our reference [PB10001200174-CP6].
100 % Brand new
