Asbestos Container Bag With glued liner 620X240X115 10 tons
Asbestos Bulk bag, Sheet Bag & Container Bag
Asbestos Bulk Bag, Sheet Bag & Container Bag
MyPalletsOnline offers you a very complete online range of Bulk Bags and PP bags dedicated to the world of asbestos waste storage and regulated wastes.
The widest choice of models available for delivery within 72 hours all over Europe. All our UN regulated Bags & Abestos Bulk bags and for hazardous material are compliant and suitable for safe storage, containment and transport to the point of treatment and recycling. They are neutral of printing of the type of dangerous material (no logo / pictogram of dangerousness). In this way you can (it is obligatory) directly in the document holder the pictogram of dangerousness.
Asbestos Sheet Bag 160X110X50 for Fiber Cement roof sheet 1 Ton
Asbestos Sheet bag with sticked liner 310X110X30 1000kg
Bulk Bag Leakproof for powders & coatings 95X95X130 1250kg
Bulk Bag Chemicals products with lining 70µ 95X95X160 1500 kg
Bulk Bag Duffle top with internal lining 70µ 96X96X120 1250 kg
Bulk Bag Hazardous Mat with liner 70µ 95X95X160 1500 kg
Bulk Bag Regulated UN - leakproof seam 90X90X120 1000kg
Asbestos Bulk Bags
Asbestos has been classified as a hazardous product for over 30 years. Regulatory decrees for private individuals and companies are numerous, obliging to control the conformity of asbestos products over time. Indeed, a progressive and natural degradation can occur over time releasing microscopic fibers and aerial novices because of ingestion during breathing.
Depending on the state of degradation, you must be obliged to replace asbestos products (fibro cement panels, pipes, ducts and also plastic floor and ceiling coverings) with non-toxic products.
Replacement, renovation and clean-up works are fully regulated. All waste from this work (also for private individuals) must be stored and contained in legally compliant packaging.
To identify compliant bags and bulk bags, a standard logo must be present and indelible. Normally the identification should appear on it. For reasons of standardization, it can also be printed in several languages and appear from 1 to 4 times.
We offer you the widest range of Bulk Bag Asbestos in standard and specific dimensions.
Asbestos sheet Bag Dimensions
You will find all our models on a basis of dimension around 90X90, the most used and declined in various heights and compositions.
With skirt or chute for filling as well as discharge variants in flat bottom or discharge chute.
Bulk Bag Asbestos for fibro cement board
Our three most used models for the storage of whole and partial plates
The small 160 X 110 X 50
The medium 260 X 110 X 50
Standard 310 X 110 X 30
Our asbestos container bag size of 620 X 240 X 115 adapts to all your needs and facilitates the work of asbestos waste disposal.
Put the bag directly into the body bin, take care to leave the 4 sides protruding. Fill your bucket as you work to clean up the pollution
Once filled, up to 20m3 depending on the size of your waste and the size of the space, fold the 4 sides and close. Your waste is then stored hermetically and securely.
Bulk bags Hazardous material UN 13H3Y & 13H2Y
We present you the Bulk bag classified UN.
To be able to contain hazardous materials and products, the bulk bag must meet certain quality and hazard display criteria.
An indelible and specific marking must appear on the bulk bag classified UN in order to inform of contents when it is filled.
The bigbags that we present are not suitable for the storage of very dangerous materials (group I), nor for moderately dangerous materials (group II). They are reserved for the storage and transport of slightly hazardous materials.
The regulatory marking visible on the outside of the bulk bag must include:
- 13H3, corresponding to the bulk bag plastic code with lining followed by an X, Z or Y.
- 13H2 corresponding to the code without lining followed by X, Z or Y, or
Depending on the product to be packaged, the dangerous goods transport label must be affixed. The bulk bag 13H3Y and 13H2Y are only suitable for 7 product classes.
Class 4 :
4.1 Flammable source
4.2 Material subject to ignition
4.3 Substances which in contact with water emit flammable gases
Class 5 :
5.1 Oxidizing substances
Class 6 :
6.1 Toxic Materials
Class 8 and 9
Important : Our UN BulkBags are all neutral pictograms and mandatory labels on the transport of dangerous goods. Depending on the dangerous products you store in bags, you will have to visibly add these pictograms and transport label yourself.
How to choose your Asbestos 1 ton Bulk Bag and Asbestos sheet bag ?
You have developed a filter that you will find on our page. You can then easily search either by finding the model you are already using or by selecting those that will correspond to your future use. These criteria are multiple and will allow you to reduce or expand your choice by positioning several values of the same criterion.
Our search filter is directly interactive, each time you select a criterion, it sorts and presents you very quickly Bags and sack suitable. For more details, simply click on the photo or "details" and you will go directly to the product page where we have added all the useful specifications to your choice.
What you need to know first of all are the weights or volume as well as the usage, the products that will fill into your Bulk Bag. A bulk bag can easily contain several hundred kilos, we advise you to check your handling and lifting equipment before packing.
Visually, all the drawings of our bulk bag include:
- Dimensions per arrow and mention of Width x Depth x Height
- Logo-pictograms of m3, weight resistance and volume equivalence litres
If the bulk bag are composed of either filling skirts, filling chutes or emptying chutes, a second photo drawing integrates the measurements of these elements.
The different types of Bulk Bag Asbestos and Regulated Products
We offer you different types of bags:
- Standard sizes with 4 straps, full opening, skirt or charing spout and only with a flat closed bottom,
- Bulk Bag for container,
- And bulk bags classified UN neutral hazardous product classification pictograms
Dimensions of empty Asbestos Bulk Bags
Width and depth
We offer you the widest range of Bulk Bag Asbestos and classified UN. All our bags are organized by width and depth (ex: 90 X 90) to reduce your search time and facilitate your selection.
Height
As PP and Bulk Bag specialists adapted to regulated waste, we have opted to separate height in dimensional criteria. In our experience, there are many of you for whom height is more important than the basic dimension (width and depth). With this option, we give you the opportunity to search by this criterion as the most important for you. You thus have a sorting and a direct selection with the height chosen and all the dimensions in base with their resistances and their capacities.
What is Volume ?
It is used to measure the theoretical capacity of your bag. Normal manufacturing tolerances can increase or decrease the filling volume by a few percent. If you load your asbestos bag with a homogeneous material such as powder or animal feed, the volume (associated with resistance) is the measure for your use. However, for packaging products of various shapes and sizes (e.g. bulk bag potatoes) there will naturally be a vacuum which limits the filling capacity.
Definition of the safety resistance
The SWL (safety weight load) specifies the weight limit above which the asbestos bag is no longer guaranteed and therefore better suited to the weight you need. There is a safety coefficient for the calculation of maximum resistances but we strongly advise against filling your Bulk Bag above the limit mentioned on each page of our products and on the safety labels present and sewn inside the sack.
What is the Grammage canva ?
The thickness of the fabric is expressed in grammage, measured in grams per square metre (gr/m²). A heavy weight indicates a strong thickness of the canvas. The thickness improves the resistance to the filling weight and also allows the bag to be approved as reusable (class SF 6/1). On the other hand, the more traditional thicknesses are SF 5/1 standard, for single use.
With a higher thickness, the resistance to shocks, cutting, shearing, and heavy products will be higher.
Your need is specific? We design your own from A to Z, we send you a prototype systematically before the production in order to validate all the technical characteristics and also that you can test it in real conditions.
Customization & Personalization of your Asbestos bulk bag
We customize on request your bulk bag (with a minimum quantity) by adding on 1, 2 or 4 printed sides, your logo or your identity.
Similarly, we can also customize the content on the security label, sewn inside each bag, with your company name, contact information and website address. You need specific information or safety pictograms, we add them and send you the preprinting for validation.
The customization does not stop there, we are able to totally adapt your asbestos Bag in using color threads for all seams and also transform straps into a specific color or reduce or lengthen the size. With a palette of over 20 standard colours available, we can also customise up to the printing of your own RAL colour code.
Impact on the Environment
Our products are 100% recyclable in suitable network dedicated to PP laminated or non-laminated plastic.
Conditions of use
Storage conditions
Empty asbestos Bags can be stored outdoors even for an extended period of time provided it is protected and the weather (rain, hail, sun) cannot be in direct contact.
However, we advise and prefer storage indoors and away from the sun's rays to avoid alterations due to excessive exposure to ultraviolet rays.
The safety labels sewn inside our sack present and remind the uses and best practices.
Handling conditions
The handling and filling conditions depend entirely on the model.
For example, if your asbestos bag is equipped with 4 standard or crossed straps (cross-corner) you can handle them by inserting the carriage forks into its 4 lifting points.
Once loaded, you can also place it on a handling pallet of appropriate dimensions for storage and shipping.
For example, when used frequently, the asbestos container bag, filled and placed on a pallet, can be racked directly.
Or the 3 or 5 skids stacking system allows you to stack safely.
We can also advise you and study for you the pallets best suited to your needs according to your logistics and storage constraints.
General and Precautions for use
When handling by hand, we strongly advise you to wear suitable safety gloves. Keep out of reach of children. These bags can be used for packaging and product and wastes packaging.
In addition, our experts are at your disposal to advise you and offer you the best selection by email or phone.
Quality of our Bulk Bags
They are manufactured according to strict quality criteria using controlled and high quality raw materials.
Sampling tests are carried out to ensure sustainable use and use in accordance with specifications. The lifting points and seams are also checked by loading and tensioning.
Produit de bonne facture Emballage soigné Livraison rapide Merci
nickel
Le client a donné une note sans laissé de commentaire
très bien fait agréable à travailler avec
Le client a donné une note sans laissé de commentaire
produit correct, conforme à l'annonce livraison sans souci
-
Most viewed products