Wooden Pallet 400 X 600 - 4 entries semi-heavy

Packaging One way Quarter Wooden Pallet semi-Heavy Duty 40X60 4 way entry 

Our new pallet manufacturers can package according to your logistic needs:

- in pallet stack Interlocked (nested)

- in a stack of pallets stacked one on top of the other

- the number of pallets constituting the stack can also be adapted to your own needs, especially if you have height constraints for the passage on the platform or under your doors. The maximum is one delivery per tray with 40 high pallets per stack.

On your request, we can offer you a delivery in a trailer truck with a larger quantity.

The dimensional family of perimeter is 400 X 600 is a 1/4 pallet.

Delivery Conditions 1/4 pallet Heavy Half 40X60

Delivery times

As from the validation of your order, the delivery time normally noted of your order is 1 to 2 weeks for quantities lower than 100.

For large quantities (full truck for example), we specifically manufacture your order.

We can also customize and add on your pallets your Logo, or any inscription desired in fire marking on wooden blocks. The delivery time is then generally between 3 and 4 weeks.

Our Carriers

We select our transport partners for you to guarantee both the reliability and quality of your delivery. We are also in direct contact with our carriers to always know where your order is.

Delivery area

We can deliver anywhere in Metropolitan France, Corsica and Europe.

That is why we systematically carry out an "estimate" study that we submit to you.

Features Wooden Half Heavy Pallet

External dimensions

The outer dimensions of the plastic pallet are 600 mm long, 400 mm wide and 135 mm high.

It is a pallet with 4 entries, i.e. you can handle your pallet with a forklift truck or a pallet truck by the 4 sides.

Weights and Resistance

1/4 Pallet 400X600, one way, weighs less than 7.5 Kgs, it resists a dynamic load of 450 kg and in static of 750 kg.

Is it nestable? No / No

Is it Rackable? No / No with a maximum load of 0 kg

Is it Stackable ? No / No

Composition of the pallet Wood pallet 400 X 600 X 135- 4 entries - semi-heavy

The dimensions below are expressed in mm

Length Width Thickness Quantity

upper Board 400x 78x 17x 5

Stringer 600x 78x 20x 2

Block 78x 78x 78x 4

Skid 400x 78x 20x 2

The total theoretical wood volume of the pallet is 7.67dm3.

The four corners are cut Yes / Yes and the soles chamfered Yes / Yes

You can find all the details of the characteristics by downloading our specifications under the tab "Technical Data Sheet".

ISPM15 Treatment and Moisture Content

The half-heavy wood pallet is subject to the ISPM 15 standard for the heat treatment of wooden packaging and pallets.

The relative humidity of the wood pallet is above 45%. For this reason, we strongly advise you to mechanically dry your pallets for your container or long-distance truck exports.

This will avoid the potential inconvenience of contamination by mould or fungus as well as the rising of humidity on your boxes during deliveries.

For your exports, we provide you a certificate of conformity of the pallets that we will have been treated in accordance with the standard ISPM15.

Conditions of use

Storage conditions

Wooden Pallet does not require any special storage conditions. You can store indoors or outdoors.

When loaded with your products, they can be stored sheltered or outdoors depending entirely on the protection and weather sensitivity of your products.

Handling conditions

New pallets are handled with an electric or manual forklift truck or pallet truck.

The logistics handling of the pallet can be carried out by its 4 sides

Precautions for use

The precautions for use are only associated with your handling conditions and the condition of the soil during transport. If you hit a pallet with the forks of a forklift truck, the forks can seriously damage the structure and alter the load resistance conditions.

When handling by hand, the use of suitable safety gloves is mandatory to prevent splinters and cuts.

Quality

Semi Heavy duty Pallet Dimension 40X60, is produced according to strict quality criteria using sections of softwood (pine, fir, Douglas fir, etc.).

The variability in moisture content of the wood imposes tolerances on the dimensions of +0/-2mm. The tolerances are greater during mechanical drying where the shrinkage of the wood is greater +0/-4mm.

Tolerances are checked on thickness, width and section lengths.

For any request, please indicate our reference [PB400600135-4-SL].